BASED ON THE INTRODUCTION OF FOREIGNADVANCED TECHNOLOGY, ACCORDING TO THE NEEDS OF THE RAPID DEVELOPMENT OFBEVERAGE FILLING EQUIPMENT IN OUR COUNTRY, A BOTTLE-CUTTING EQUIPMENT WITH THELEADING LEVEL IN CHINA HAS BEEN DEVELOPED. THIS KIND OF EQUIPMENT ISCHARACTERIZED BY HIGH BOTTLE-HANDLING EFFICIENCY AND LITTLE DAMAGE TO THEBOTTLE. IT IS WIDELY USED IN BEVERAGE MANUFACTURERS AT HOME AND ABROAD. PRODUCTDESCRIPTION: IT IS USED FOR THE ARRANGEMENT OF DISORDERED POLYESTER BOTTLES,THE UNORGANIZED BOTTLES ARE SENT TO THE BOTTLE STORAGE RING OF THEBOTTLE-SORTING MACHINE THROUGH A HOIST, THE BOTTLES ARE POSITIONED BYTHEMSELVES IN THE BOTTLE COMPARTMENT BY THE PUSHING FORCE OF THE TURNTABLE, ANDTHE FUNCTION OF THE AIR FLOW THROUGH THE BOTTLE-TURNING DEVICE, THE BOTTLE ISARRANGED INTO A VERTICAL BOTTLE MOUTH, AND THE OUTPUT OF THE PNEUMATIC BOTTLECONVEYING SYSTEM ENTERS THE NEXT WORKING PROCEDURE. PERFORMANCE AND FEATURES:1, THIS MACHINE ADOPTS PLC COMPUTER CONTROL, FREQUENCY CONVERSION SPEEDREGULATION, ADJUST PRODUCTION CAPACITY, AND EQUIPPED WITH A WEEDING DEVICE,AUTOMATIC WEEDING IS EXTRUDED OR DEFORMED BOTTLES. 2. THE MAIN MOTOR REDUCERADOPTS THE TORQUE LIMITING MECHANISM TO PREVENT THE MACHINE FROM BEING DAMAGEDIN CASE OF FAILURE. 3. ADOPT TWO-TIME BOTTLE PUSHING AND DISCHARGING MECHANISMTO ENSURE THAT THERE ARE BOTTLES IN EVERY BOTTLE DROPPING STATION, AND IMPROVETHE EFFICIENCY OF BOTTLE DISCHARGING. 4, THE USE OF HANGING BOTTLE MOUTHCONVEYING DUCT, TO AVOID THE BOTTLE IN THE TRANSFER OF OVERTURNED. 5. THEBROKEN BOTTLE REMOVING MECHANISM IS ARRANGED. 6, EQUIPPED WITH A CARD BOTTLEDETECTOR, WHEN THE CARD BOTTLE AUTOMATICALLY STOP AND ALARM. 7. IT IS EQUIPPEDWITH A BOTTLE-LESS DETECTOR, WHICH IS USED TO SEND A WORKING SIGNAL TO THEHOIST, WHICH WILL AUTOMATICALLY REPLENISH THE BOTTLES. 8. A PHOTOELECTRICSWITCH IS ARRANGED ON THE AIR DUCT FOR FEEDING BOTTLES, WHICH IS USED FORCONTROLLING THE STARTING AND STOPPING OF THE BOTTLE-HANDLING MACHINE. 9. THEBOTTLE-DRESSING MACHINE IS PROVIDED WITH AN OIL-FILLING NOZZLE, WHICH CANCONVENIENTLY ADD LUBRICATING OIL TO THE GEARS, BEARINGS AND CAMS. 10, WITHMAINTENANCE DOOR AND MOLD REPLACEMENT DOOR. 11, THE MAIN ELECTRICAL COMPONENTSFREQUENCY CONVERTER, PLC, PHOTOELECTRIC SWITCH, RELAY ARE MITSUBISHI, OMRON,SIEMENS AND OTHER COMPONENTS. 12. IMPORTED PRODUCTS ARE USED IN THE PNEUMATICSYSTEM.

TECHNICAL PARAMETER